How To Control RGB On MSI Motherboard (Complete Guide)

MSI motherboard have RGB control in the front panel header. It is called as RGB Lightstrip. In order to control the RGB on MSI motherboard, you have to enable the RGB control from the motherboard’s UEFI (BIOS) settings.

MSI motherboard RGB LED settings are pretty simple and can be controlled through the MSI RGB utility software. You need to install the software and then launch it. It is important to note that the software needs to be run as administrator so that it can access the motherboard RGB settings.

Now, after launching the software, you can open the main menu and click on the RGB Utility option from the list. There you will find a few options to configure your RGB settings.

Here we will cover every aspect of how to control RGB on MSI motherboard.

How to Control RGB on MSI Motherboard 

You can control the RGB on the motherboard through the RGB controller. This controller also acts as the RGB light strip and the system can be controlled through the RGB controller.

Step 1: Connect the RGB controller to the motherboard: Connect the RGB controller to the motherboard.

Step 2: Install the RGB software: Install the RGB software.

Step 3: Enable the RGB controller: Turn on the RGB controller.

Step 4: Turn on the RGB lights: Turn on the RGB lights.

The motherboard is ready. You can now control the RGB lights on the motherboard through the RGB controller.

How to Control RGB Fans on MSI Motherboard

If you have a high-end motherboard, you should use the fan control panel. However, if you have an older motherboard, you can use the BIOS to control the fans.

Simply go to the UEFI, then select the fan controller tab, and check the fan you wish to turn on or off.

Step 1: Go to UEFI, select the fan controller tab, and press the F2 key to enter the BIOS setup.

Step 2: Press ESC, then F10 to enter the UEFI setup.

Step 3: Select the fan you wish to control.

Step 4: Press the UP or DOWN arrow key to control the fan speed.

How to Control MSI Motherboard RGB with Icue

Basically, all motherboards are RGB enabled to give you a color backlit display when they are turned on. However, not all motherboards are made with RGB LEDs. In order for you to control the motherboard with the RGB LEDs, you must have an iCUE utility. 

Step 1: Go to the MSI BIOS.

Step 2: Open up the LED control tab.

Step 3: Find the number of RGB LEDs.

Step 4: Convert the number of RGB LEDs to the number of colors.

For more information on the iCUE utility, check out the following link.

If you have an RGB LED display and an iCUE utility, then you can do this:

1. Turn on the display.

2. Press F8 to open the BIOS utility.

3. Press the F2 key to enter the menu.

4. Press the F3 key to enter the iCUE utility.

5. Press the R key to open the Advanced options menu.

How to Disable RGB Lighting on Your Motherboard

This is usually done by disabling the RGB LED controller. There will be a jumper or a label on the motherboard that lets you know how to turn off the LED controllers.

To disable the motherboard’s RGB lighting, open up your motherboard manual, find where to locate the “RGB controls” setting, and then turn it off. Or you will

1. Open the BIOS on your motherboard

2. Look for a section called Advanced Graphics or Graphics Options

3. Disable RGB lighting in this section 

How to Control RGB Lights Without Installing MSI Center

The best way to control the RGB lights on the motherboard is to download and install the MSI Afterburner software which is free and highly efficient for this purpose. You can control the color of the lights and also change the colors using the options present in the software.

Step 1: Download and install the MSI Afterburner software.

Step 2: Open the software and go to the RGB section.

Step 3: Click the “RGB” button and select the color you want to use.

Step 4: Click “Apply” and “Save”.

Step 5: Click the “Settings” button and then click “Save Settings”.

Why Is MSI Mystic Light Not Working

There could be a number of reasons why your MSI Mystic Light may not be working. First, it could be that the light is not plugged into the motherboard properly. Make sure that the light is plugged into the motherboard and that the power is turned on.

Another reason is that the motherboard may have an issue. If you look at your motherboard, you should see a small button with a yellow light on it. If the yellow light is on, then there is a problem.

If it is off, then there is nothing wrong. If you can’t find the yellow light, then it could be that the motherboard has a problem. The motherboard will be replaced if there is a problem.

Conclusion

RGB LED controls are not commonly found on most motherboards. However, there are many boards out there that allow you to control your LED lights using software or hardware. This system can be applied if you ask how to control RGB on MSI motherboard.

Most motherboards allow you to assign different colors to the various pins that connect to the light strip, however, this feature is not commonly found on the basic motherboards.

Some motherboards provide a software utility that allows you to change the colors of the LED strips, while others require you to buy a dedicated RGB controller such as the DYOR RGB Controller.

FAQ

How to Use RGB on MSI Motherboard

 Click on the Performance tab and then under the Hardware heading, click on Advanced Settings. In the Advanced Settings window, under the PCI Express heading, click on the RGB button.

Does MSI Have RGB Software

Not really. But MSI has a feature called Mystic Light where you can customize the color of the motherboard with different effects. If you want the colors to change based on the time of the day or if you want to change the colors to something else, you can do that too.